Built & run by Eye To Ad Media. Want a site like this?

ADA showers: types, specs and choosing the right one

A spec sheet for the three ADA shower types, plus how to pick a compliant product or a sensible "ADA-style" shower for a home.

Last updated October 16, 2026

Sponsored

The short answer

The 2010 ADA Standards recognize three shower types: a 36 by 36 inch transfer shower, a standard roll-in at least 30 by 60 inches with the long side open, and an alternate roll-in at least 36 by 60 inches with a 36-inch entry at one end. Businesses and other covered facilities must meet section 608. Private homes don't have to, so an "ADA-style" home shower can borrow the parts that matter for the person who will use it.

This page is the spec sheet. For planning steps, features and funding questions, read our ADA and handicap shower installation guide.

The three ADA shower types, side by side

All figures below come from section 608, section 610 and section 609 of the 2010 ADA Standards as published by the U.S. Access Board. Dimensions are clear inside measurements.

TransferStandard roll-inAlternate roll-in
Inside size36 x 36 in30 in min x 60 in min36 in min x 60 in min
Entry36 in min on the face60 in min, the full long side36 in min at one end of the long side
Clear space outside36 in x 48 in from the control wall30 in x 60 in alongside the open faceNo separate clearance in the text; see figure 608.2.3
Threshold½ in max, beveled, rounded or vertical (2 in allowed in some existing slabs)½ in max½ in max
SeatRequired, folding or fixed; extends to within 3 in of the entryIf provided, folding, on the side wall next to the controlsIf provided, folding, on the front wall
Seat heightTop of seat 17 to 19 in above the bathroom floor; must resist 250 lb of force
Grab barsAcross the control wall and back wall to 18 in from the control wallBack wall and wall opposite the seat (three walls if no seat); none above the seatBack wall and side wall farthest from the entry; none above the seat
ControlsSide wall opposite the seat, 38 to 48 in high, within 15 in of the seat centerlineAbove the grab bar, no higher than 48 in; back wall within 27 in of the seat wall if a seat is installedAbove the grab bar, no higher than 48 in, positioned by seat location

Rules that apply to all three: a handheld spray unit on a hose at least 59 inches long that also works as a fixed head, an on/off control with a non-positive shut-off, water delivered at 120°F maximum, and grab bars 1¼ to 2 inches in diameter mounted 33 to 36 inches above the floor. Enclosures can't block the controls or a transfer to the seat.

Sponsored

Which type fits which person

  • Transfer shower: for someone who can move from a wheelchair to a seat with a short slide. It's compact, which helps in tight bathrooms.
  • Standard roll-in: for someone who stays in a shower wheelchair, or who needs a caregiver alongside. The full-width opening gives the most access.
  • Alternate roll-in: a deeper compartment with a narrower door-style entry. It suits layouts where the long wall can't be fully open.

"ADA compliant" vs. "ADA-style" at home

The ADA's public accommodation rules cover businesses and facilities open to the public, as ADA.gov explains, not private single-family homes. In a home, "ADA-style" usually means a shower that borrows the most useful features (low threshold, seat, grab bar blocking, handheld) without meeting every dimension. Even the ADA Standards give residential dwelling units some flexibility: grab bars and transfer-shower seats can be left out if the walls are reinforced for later installation.

For a commercial project in Colorado, such as a gym, hotel, clinic or office, the shower also has to satisfy the building code your city or county has adopted, which often references the ICC A117.1 accessibility standard. Your architect and local building department have the final word. Read the full 2010 ADA Standards for Accessible Design on ADA.gov.

Featured · Aging Safely Baths & Showers4Less

Need a compliant shower or an ADA-style one?

Aging Safely Baths installs roll-in, ADA and low-threshold showers across Colorado, and Showers4Less sells code-compliant and barrier-free shower units with free shipping. Tell them who will use the shower and get help matching the type.

Call 1-888-779-2284 Aging Safely Baths · Shop Showers4Less

Featured placements are sponsored.

By sending this form you agree to our privacy policy. We never sell your information.

Choosing the product

One-piece or multi-piece. One-piece units have no seams but often won't fit through an existing bathroom door, so they're common in new construction. Multi-piece units are made for remodels.

Seat shape. The ADA allows rectangular or L-shaped seats with specific edge distances. L-shaped seats give more support for some users, so let the person who'll use it try both if possible.

Product claims. A catalog that says "ADA compliant" usually means the unit can be installed to meet the standard. Compliance still depends on installation: the threshold, clear floor space, control height and grab bar placement all happen on site.

Doorways. A wheelchair also has to reach the shower. The ADA Standards call for doors with at least 32 inches of clear width, which many older Colorado bathrooms don't have.

What to ask a contractor

  • Are you building to the 2010 ADA Standards, or an ADA-style shower? Which features are included?
  • Which shower type (transfer, standard roll-in or alternate roll-in) and which product, by model?
  • How will you hit the threshold height, and will the floor or drain need to change?
  • Where will the seat, controls and handheld go relative to the user's stronger side?
  • Is wall blocking for grab bars and a seat included?
  • Will the bathroom door give enough clear width, and who handles permits?

More options: roll-in showers, walk-in showers, walk-in tubs, all shower types and bathroom remodeling across Colorado.

No bathing product eliminates the risk of falling. Accessible showers are designed to reduce fall risk when used properly.

Common questions

What are the three ADA shower types?

Transfer showers (36 by 36 inches), standard roll-in showers (at least 30 by 60 inches with the long side open) and alternate roll-in showers (at least 36 by 60 inches with a 36-inch entry at one end).

What is the maximum threshold for an ADA shower?

Half an inch for roll-in showers. Transfer showers also allow half an inch, beveled, rounded or vertical, with up to 2 inches allowed in some existing buildings where cutting the slab is not possible.

How high should an ADA shower seat be?

The top of the seat should be 17 to 19 inches above the bathroom floor, and the seat must withstand 250 pounds of force.

Does an ADA shower need a handheld shower head?

Yes, in most cases. The standards call for a handheld spray unit on a hose at least 59 inches long that can also work as a fixed shower head.

Does a shower labeled ADA compliant guarantee compliance?

No. The label means the product can meet the standard. Compliance depends on installation details like threshold height, clear floor space, control height and grab bar placement.

Need a website?